Electro-Voice EVID C8.2 8-Inch Two-Way Coaxial Ceiling Loudspeaker White - Pair

The Electro-Voice EVIDC8.2 8-Inch Two-Way Coaxial Ceiling Loudspeaker | White - Pair is a complete two-way ceiling loudspeaker package. The package consists of a bezel assembly, grille, rear enclosure, 8-inch coax two-way loudspeaker and internal line-matching transformer. The loudspeaker features a waveguide coupled titanium coated dome tweeter. The EVID C8.2 loudspeaker utilizes a 2nd order crossover network at 2.5 kHz, with a comprehensive protection circuit to protect the network, woofer, and tweeter drivers from excessive power levels. The C8.2 utilizes a transformer that offers a selection of 1.88 (70-V only), 3.75, 7.5, 15 or 30 watts delivered to the loudspeaker system using either 70-V or 100-V lines, or 8 ohm bypass. Selection is via a convenient switch on the front baffle. The perforated grille is finished in semi-gloss white powder-coated enamel. The baffle and bezel are constructed from UL 94V-0 rated ABS. The rear enclosure is constructed from zinc-plated, heavy gauge steel. The rear enclosure, with fiberglass damping material, provides an optimum internal volume for extended low-frequency performance. A rear cover, with provisions for a junction box fitting, provides access to a 4- pin terminal block that allows direct connection to the speaker with 12 gauge wire and provides pass through to additional speakers. The EVID C8.2D model features a 3-pin fire-safety rated input block. A tile bridge is included for safe suspension of the C8.2 ceiling systems in a drop ceiling that uses mineral wool, or other fiber-based ceiling tiles. The EVID line of ceiling speakers has been designed to work together as a complete system in a wide range of different ceiling constructions. They provide wide dispersion, high-efficiency, high-maximum output, ease of installation, and wide-range reproduction of music or voice.

Key Features

• 8" coaxial two-way with extended LF
• Waveguide coupled Ti Tweeter
• Full bandwidth overload protection
• Front baffle wattage tap adjustment
• Integrated low loss matching transformer allows for either 70v/100v or 8-ohm operation
• Includes tile bridge and mounting ring for easy installation
• Integrated ported enclosure for extended bass response
• UL and CE listed

Technical Specs

Frequency Response (-10dB)

50Hz – 20kHz

Coverage (Conical)

110°

Power Handling

75W Cont./ 300W Peak

Sensitivity (SPL 1W/1m)

91dB

Max. Calculated SPL

110 dB Cont./116 dB Peak

Impedance

8 ohms nominal (transformer bypass)

Network

Network and transducers protected, 12dB/oct 2.6kHz

LF Transducer

8 in. (200mm) Polypropylene Cone

HF Transducer

1 in. (25mm) Ti Mylar Laminate

Transformer Taps

70V: 1.88, 3.75, 7.5, 15 or 30W

100V: 3.75, 7.5, 15 or 30W

Bypass: 8 ohms

Connectors

C8.2: Phoenix type removable, with screw terminals and “loop-thru”, accepts 12 GA wire

C8.2D: Fire-safety rated input block, 3 terminal barrier strip accepts 12 GA wire

Enclosure Material

Baffle- UL 94V-O rated ABS

Backcan-Zinc plated steel

Grille

Perforated Powder Coated Steel with Safety Tether

Support Hardware

Tile Bridge, Backing Plate Support, Cutout Template, Paint Shield

Dimensions (H x Dia.)

10.0” x 10.6” (255mm x 270mm)

Cutout Size

10.75” (272mm)

Net Weight (each)

11.0 lbs. (5.0kg)