Extruded aluminum skid mounted cold 8 GPM 2500 PSI Bandit pressure washer BK8025HC with pressure trapped unloader.

This unit offers a beefy base. PSI offers an easy-to-access pump tensioner underneath the Comet pump. The aluminum belt guard is assembled with heavy-duty bolts instead of rivets.

8 GPM 2500 PSI Honda 13 hp GX390 Comet TW8030S pump, banded belt, extruded aluminum frame, black spring pressure trapped unloader, gun/wand assembly with brass quick connects, 50' grey high-pressure hose with quick connects, 4 x 10.0 orifice colored quick connect nozzles. Oil prefilled in pump and engine.

Purchase these items as well:

• A length of 3/8" (AGY06) or 1/2" (AGY08) yellow ag hose. We offer it by the foot.
• Two barbs for the bypass hose. You need a hose barb (1175) for the outlet of the unloader and an elbow hose barb (4784) for the tank. The barb at the tank and bulkhead is included in the PL-8-TO or the PL-8-TA kit(s).

If you need a nozzle holder (6540), purchase it separately. You will receive 5 loose quick-connect nozzles.

 Purchase a 6741 chemical injector and quick connects; plug and socket (3878, 2401), a length of 1/4" clear braided poly hose (2903), and a filter (TF-C) for this unit if you need an injector.

 The unit arrives with the coupler on the outlet and plug on the inlet of the gun. We recommend switching the plug and coupler.

 We strongly recommend that you purchase our PL-8-TO or PL-8-TA kit for a tote or a horizontal leg tank which has almost everything you need to correctly plumb this unit. Please add the items mentioned above to complete your installation.

Upsizing your hoses will prevent back-pressure to your pump, help your valves and high-pressure seals last longer, prevent your safety relief valve from spraying water, help your pump run at a cooler temperature, supply enough water to your pump using the 'double your supply hose ID in relation to your inlet port' rule and keep your pump cooler leading to less downtime. Double-check your surface cleaner hose to ensure that it is 3/8" ID instead of 1/4". 

Always use medium thread lock on your high pressure fittings instead of Teflon tape. Teflon tape will end up in the pump valves or clog nozzles.

We recommend a minimum of a 200-gallon water tank or IBC tote.

Add a high-temperature Hudson float valve (Hudson-HT) and Hudson float valve installation kit (Hudson-A) to prevent over-filling your water tank. The Hudson float valve will automatically stop the flow into your tank when installed properly in the headspace of your water supply tank.

We highly recommend adding the best high pressure 3/8" ball valve (6292) to this order to allow you to turn off the flow of water to switch from the gun to a Classic surface cleaner. You will need to ask for two nozzles 5.0 25 degrees for a two nozzle spray bar or four nozzles.

The 19" Classic, the 24" Ground Force, the 24" Lil Big Guy, or the 28" Big Guy with the upgraded 3/8" high-pressure hose is the perfect complement to this cold pressure washer.

As with any pressure washer, do not adjust the unloader. The unloader is set at a spike pressure of 200 PSI above the operating pressure of the pump and is meant to be left alone. If you need less pressure, change out the nozzles to a larger orifice and never smaller than what is called for using factory specifications using GPM and pressure. This unit requires an 10.0 orifice or larger nozzle. You can add the Kyle Davis long range shooter nozzle (SN8I) to this pressure washer to experiment with pressure and distance.

 Can not be shipped inside the state of California